lilo 1:24.0-2 / usr / sbin / lilo-uuid-diskid

#!/usr/bin/perl -w

#       lilo-uuid-diskid - convert boot and root options to diskid
#                          and uuid in /etc/lilo.conf
#
#       Copyright 2010-2011 Joachim Wiedorn <ad_debian at joonet.de>
#       
#       This program is free software; you can redistribute it and/or modify
#       it under the terms of the GNU General Public License as published by
#       the Free Software Foundation; either version 2 of the License, or
#       (at your option) any later version.
#       
#       This program is distributed in the hope that it will be useful,
#       but WITHOUT ANY WARRANTY; without even the implied warranty of
#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#       GNU General Public License for more details.
#       
#       You should have received a copy of the GNU General Public License
#       along with this program; if not, write to the Free Software
#       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
#       MA 02110-1301, USA.

#---- some modules
use strict;
use warnings;
use Getopt::Std;
use Pod::Usage;
use File::Copy;


#---- global variables
my $prog = $0;
$prog =~ s#.*/##;
my $version = "0.3";

#---- parameter check
our $opt_h = 0;
our $opt_v = 0;
getopts('hv');
# define perldoc usage
pod2usage(1) if $opt_h;

#---- other variables
our $liloconf = "/etc/lilo.conf";
our $liloconfold = '';
our $fstabconf = "/etc/fstab";
our $idpath = "/dev/disk/by-id";
our $uuidpath = "/dev/disk/by-uuid";
our $labpath = "/dev/disk/by-label";

our $bootready = 0;
our $boot_id = '';
our $root_id = '';
our $optboot = 0;     #  -1 = only ^#boot,  0 = nothing,  1 = ^boot  exist

#-------------------- main program --------------------

sub main {
	
	my $exit = 0;

	if (@ARGV == 1) {
		$liloconf = "$ARGV[0]";
	}

	if (-f $liloconf) {
		$liloconfold = $liloconf . "_old";
		$exit = convert_lilo_conf();
	}
	else {
		print "cannot open $liloconf: file not found!\n";
		$exit = 1;
	}
	return $exit;
}

#-------------------- subroutines --------------------

sub convert_lilo_conf {
	
	my @sellines;
	my $exit = 0;
	my $line = '';
	my $bootline = '';

	# at first read lilo.conf and search for 'boot'
	my $ok = 0;
	open(MYFH, "<$liloconf") or die ("cannot open $liloconf: $!");
	@sellines = grep(/^#?boot/, readline(MYFH));
	close(MYFH);

	# analyse the boot option in config file
	foreach $line (@sellines) {
		if ($line =~ /^boot/) {
			# activated boot option found
			$bootline = $line;
			chomp $bootline;
			$optboot = 1;
		}
		if ($optboot == 0) {
			# commented boot option found
			if ($line =~ /^#boot/) { $optboot = -1; }
		}
	}

	if ($optboot != 0) {

		if($opt_v) { print "++++++++++ write options into $liloconf ++++++++++\n\n"; }

		if ( detect_boot_device($bootline) == 0) {
			# found diskid or uuid for boot device: $boot_id
			if (-l $boot_id) {
				write_boot_option();
			}
			else {
				if($opt_v) { print "cannot open $boot_id: link does not exist!\n"; }
				$exit = 1;
			}
		}
		else {
			if($opt_v) { print "\n"; }
		}
	}
	else {
		print "cannot use $liloconf: uncomplete configuration!\n";
		$exit = 1;
	}

	return $exit;
}


sub detect_boot_device {
	
	my $boot_line = $_[0];
	my $boot_disk = '';
	my $searchpath;
	my $_part;
	my $exit = 0;

	if ($optboot == 1) {
		# the usual case: found ^boot in lilo.conf
		$boot_disk = ($boot_line =~ /^boot *= *(\/dev\/.*)/) ? ($1) : ();

		# check if the found partition is a raid volume
		if($boot_disk =~ /\/dev\/md/) {
			$boot_disk = check_raid($boot_disk);
		}
	}
	elsif ($optboot == -1) {
		# found only ^#boot in lilo.conf, then /etc/fstab is needed
		if (-f $fstabconf) {
			if($opt_v) {
				print "no boot option in $liloconf: selecting from $fstabconf\n";
			}
			$boot_disk = read_fstab($fstabconf);
		}
		else {
			print "no boot option in $liloconf and no file $fstabconf found!\n";
			$exit = 1;
		}
	}

	if (-b $boot_disk) {
		if($boot_disk =~ /$idpath/ 
				or $boot_disk =~ /$uuidpath/
				or $boot_disk =~ /$labpath/) {
			print "boot option is already updated to $boot_disk\n";
			$bootready = 1; $exit = 1;
		}
		else {
			if($opt_v) { print "convert boot option $boot_disk into new ID\n"; }

			# is it a block device name ?
			$_part = $boot_disk;
			$_part =~ s/\d+$//;
			$searchpath = ($_part eq $boot_disk) ? $idpath : $uuidpath;

			$boot_id = $searchpath . "/" . find_id_link($boot_disk,$searchpath);
			if(not -l "$boot_id") { $exit = 1; }
		}
	}
	else {
		if($opt_v) { print "cannot read $boot_disk: link does not exist!\n"; }
		$exit = 1;
	}
	return $exit;
}

sub read_fstab {
	
	my $ffile = $_[0];
	my $root_line;
	my $root_part;
	my $_item;

	$root_line = `awk '{ if (\$2=="/") print \$1}' <$ffile`;

	# search for the last valid entry in /etc/fstab about root partition
	foreach $_item (split("\n", $root_line)) {
		if(not $_item =~ /#/) {
			$root_part = $_item;
		}
	}
	# check if the found partition is a raid volume
	if($root_part =~ /\/dev\/md/) {
	}
	unless ($root_part =~ /^UUID/) {
		# now find the right block device name
		$root_part =~ s/\d+$//;
	}

	return $root_part;
}

sub check_raid {
	
	my $part = $_[0];
	my $mdname;
	my $md;
	my @devices;
	
	# check if the found partition is a raid volume
	if($part =~ /\/dev\/md/)
	{
		$mdname = $part;
		$mdname =~ s/\/dev\///;
		$mdname =~ s/\///;
		$md = `grep $mdname /proc/mdstat`;
	
		@devices = split(" ", $md);
		@devices = sort(@devices[4..$#devices]);
		$part = "/dev/" . $devices[0];
		$part =~ s/\[.*$//;

	}
	return $part;
}

sub detect_root_device {
	
	my $root_line = $_[0];
	my $root_disk = '';
	my $root_link = '';
	my $exit = 0;

	if (not $exit) {
		# extract the root device name
		$root_disk = ( $root_line =~ /^\t?root *= *(.*)/ ) ? ($1) : ();
		chomp $root_disk;

		# check if the found partition is a raid volume
		if($root_disk =~ /\/dev\/md/) {
			$root_disk = check_raid($root_disk);
		}
	}

	# check if root device exist / also for raid volume
	if (-b $root_disk) {
		if($opt_v) { print "convert root option $root_disk into new UUID\n"; }
		$root_id = find_id_link($root_disk,$uuidpath);
		if (not -l "$uuidpath/$root_id") { $exit = 1; }
	}
	else {
		# nothing to do but perhaps give a message
		$exit = 1;
		$root_link = $root_disk;
		$root_link =~ s{\"}{}g;
		$root_link =~ s{^LABEL=}{/dev/disk/by-label/};
		$root_link =~ s{^UUID=}{/dev/disk/by-uuid/};
		if (not -l $root_link) {
			if($opt_v) { print "cannot check $root_link: link does not exist!\n"; }
		}
	}
	return $exit;
}

sub find_id_link {
	
	my $olddev = $_[0];
	my $path_id = $_[1];
	my @sellinks;
	my $_idlink;
	my $_actlink;
	my $newdevid = '';
	my $ok = 0;

	opendir(MYDH, "$path_id") or die("cannot open $path_id: $! \n");
	@sellinks = grep(!/\-part\d\d?$/, grep(!/^\.\.?$/, readdir(MYDH)));
	@sellinks = sort(@sellinks);
	closedir(MYDH);

	foreach $_idlink (@sellinks) {
		if(not $_idlink =~ /^usb/ and length($_idlink) > 10 and $ok == 0) {
			$_actlink = readlink("$path_id/$_idlink");
			$_actlink =~ s/^\.\.\/\.\.\//\/dev\//;
			if($opt_v) { print "** try: $_actlink => $_idlink \n"; }
			
			if($_actlink eq $olddev) {
				$newdevid = $_idlink;
				if($opt_v) { print "** convert: $_actlink => $path_id/$_idlink \n"; }
				# run only one time
				$ok = 1;
			}
		}
	}

	if($opt_v and not $ok) { print "$olddev not converted: link not useful\n\n"; }
	
	return ($newdevid);
}

sub write_boot_option {
	
	my $oldline = '';
	my $comline = '';
	my $newline = '';
	my @status;
	my $_preold;
	my $_prenew;

	if (-f $liloconf) {
		# move old lilo.conf to lilo.conf_old
		@status = stat($liloconf);
		move ($liloconf, $liloconfold);
		utime ($status[9],$status[9],$liloconfold);
		chmod (0600,$liloconfold);

		# copy all lines from lilo.conf_old into
		# new lilo.conf and add 'boot=' line
		my $ok = 0;
		open(MYFH_NEW, "> $liloconf") or die("cannot open $liloconf: $!");
		open(MYFH_OLD, "< $liloconfold") or die ("cannot open $liloconfold: $!");

		while (<MYFH_OLD>) {
			# line read from MYFH_OLD
			$oldline = $_;

			if (/^boot/ and $ok == 0) {
				$newline = "boot = $boot_id\n";
				print MYFH_NEW "#" . $oldline;
				print MYFH_NEW $newline;
				if($opt_v) { print "+  #" . $oldline; }
				print "+  " . $newline;
				if($opt_v) { print "\n"; }
				# convert only one time
				$ok = 1;
			}
			elsif (/^#boot/ and $optboot == -1 and $ok == 0) {
				# found a line with boot option commented out
				$newline = "boot = $boot_id\n";
				print MYFH_NEW $oldline;
				print MYFH_NEW $newline;
				if($opt_v) { print "+  " . $oldline; }
				print "+  " . $newline;
				if($opt_v) { print "\n"; }
				# convert only one time
				$ok = 1;
			}
			elsif (/^root/ or /^\troot/) {
				# found a line with root option
				if (detect_root_device($oldline) == 0) {
					$comline = comment_root_line($oldline);
					$newline = modern_root_line($oldline,$root_id);
					print MYFH_NEW $comline;
					print MYFH_NEW $newline;
					if($opt_v) { print '+  ' . $comline; }
					print '+  ' . $newline;
					if($opt_v) { print "\n"; }
				}
				else {
					print MYFH_NEW $oldline;
				}
			}
			else {
				print MYFH_NEW $oldline;
			}
		}
		close(MYFH_OLD);
		close(MYFH_NEW);
		chmod (0600,$liloconf);
	}
	else {
		print "file $liloconf does not exist: nothing changed\n";
	}
}

sub comment_root_line {

	my $rootline = $_[0];

	if( $rootline =~ /root/) {
		$rootline =~ s/root/#root/;
	}
	return $rootline;
}

sub modern_root_line {
	
	my $oldline = $_[0];
	my $newline = $_[0];
	my $rootid  = $_[1];
	my $indent  = '';

	if($oldline =~ /root/) {
		$indent = $oldline;
		chomp $indent;
		$indent =~ s/^(\t?)root.*/$1/;
		$newline = $indent . "root = \"UUID=$rootid\"\n";
	}
	return $newline;
}


main();


__END__


=head1 NAME

lilo-uuid-diskid - convert boot / root options to diskid and uuid in lilo.conf

=head1 SYNOPSIS

lilo-uuid-diskid [-h] [-v] [lilo.conf]

=head1 DESCRIPTION

This script looks for the boot block device or boot partition and create the
right diskid or uuid as boot option. Then it looks for all root partitions
and create the right uuids as root options.

These conversions are necessary for use with newer kernel (>= 2.6.26) if it
use the libata module for parallel and serial ATA interfaces of block devices
(i. e. hard disks with IDE or SATA interface, usbsticks).

=head1 EXAMPLES

Lines in the configuration file /etc/lilo.conf:

  #boot = /dev/sda
  boot = /dev/disk/by-id/ata-SAMSUNG_SV1604N_S01FJ10X999999

  #root = /dev/sda1
  root = "UUID=18843936-00f9-4df0-a373-000d05a5dd44"

=head1 OPTIONS

=over 4

=item B<-h>

Print a brief help.

=item B<-v>

Print verbose messages.

=back

=head1 AUTHOR

B<lilo-uuid-diskid> was written by Joachim Wiedorn.

=cut