/etc/freeradius/modules/ippool is in freeradius 2.1.12+dfsg-1.2.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 | # -*- text -*-
#
# $Id$
# Do server side ip pool management. Should be added in
# post-auth and accounting sections.
#
# The module also requires the existance of the Pool-Name
# attribute. That way the administrator can add the Pool-Name
# attribute in the user profiles and use different pools for
# different users. The Pool-Name attribute is a *check* item
# not a reply item.
#
# The Pool-Name should be set to the ippool module instance
# name or to DEFAULT to match any module.
#
# Example:
# radiusd.conf: ippool students { [...] }
# ippool teachers { [...] }
# users file : DEFAULT Group == students, Pool-Name := "students"
# DEFAULT Group == teachers, Pool-Name := "teachers"
# DEFAULT Group == other, Pool-Name := "DEFAULT"
#
# ********* IF YOU CHANGE THE RANGE PARAMETERS YOU MUST *********
# ********* THEN ERASE THE DB FILES *********
#
ippool main_pool {
# range-start,range-stop:
# The start and end ip addresses for this pool.
range-start = 192.168.1.1
range-stop = 192.168.3.254
# netmask:
# The network mask used for this pool.
netmask = 255.255.255.0
# cache-size:
# The gdbm cache size for the db files. Should
# be equal to the number of ip's available in
# the ip pool
cache-size = 800
# session-db:
# The main db file used to allocate addresses.
session-db = ${db_dir}/db.ippool
# ip-index:
# Helper db index file used in multilink
ip-index = ${db_dir}/db.ipindex
# override:
# If set, the Framed-IP-Address already in the
# reply (if any) will be discarded, and replaced
# with a Framed-IP-Address assigned here.
override = no
# maximum-timeout:
# Specifies the maximum time in seconds that an
# entry may be active. If set to zero, means
# "no timeout". The default value is 0
maximum-timeout = 0
# key:
# The key to use for the session database (which
# holds the allocated ip's) normally it should
# just be the nas ip/port (which is the default).
#
# If your NAS sends the same value of NAS-Port
# all requests, the key should be based on some
# other attribute that is in ALL requests, AND
# is unique to each machine needing an IP address.
#key = "%{NAS-IP-Address} %{NAS-Port}"
}
|